Patio Doors Cost: UK Prices for Sliding and French Doors

Sliding glass patio doors opening onto a planted courtyard garden

Quick answer: Patio doors cost about £850–£2,200 fitted for a like-for-like uPVC sliding or French door swap in 2026, and £2,500–£5,000+ for a 2-pane aluminium slider. Turning a window into patio doors usually costs £1,900–£3,500, and widening an opening adds roughly £1,000–£2,500+ for the lintel or beam and making good. Supply-only uPVC sets start at around £400–£600.

Last updated: 19 November 2026. Prices are drawn from six 2026 UK cost guides and suppliers, named below.

Patio doors cost far less than most people expect when you’re simply swapping an old set for a new one in the same opening. The price climbs when you change the material (aluminium costs a lot more than uPVC), go wider, or cut a new opening in a wall. This guide sets out 2026 patio doors cost figures for sliding and French doors, fitted and supply-only, plus the building regulations rules and three worked examples.

Patio doors cost at a glance

Here’s what UK guides published or updated in 2026 say a typical job costs, supplied and fitted:

JobTypical cost (fitted)Source
uPVC sliding doors, like-for-like£850–£2,200MyJobQuote (Sept 2026) £850 average; BookaBuilderUK (June 2026) £900–£3,100; Trade2Base (June 2026) £1,300–£2,200
uPVC French doors, like-for-like£750–£1,250MyJobQuote patio (£750) and French door (£950–£1,250) guides
Aluminium 2-pane sliding doors£2,500–£5,000+Trade2Base (June 2026)
Large or lift-and-slide aluminium£4,000–£8,000+Trade2Base (June 2026)
Replacing existing doors (any type)£750–£2,500MyJobQuote (Sept 2026)
New opening from a window£1,900–£3,500MyJobQuote (Sept 2026)
Widening an opening (added cost)+£1,000–£2,500+Trade2Base (June 2026)

The guides don’t agree perfectly. MyJobQuote’s averages sit at the cheap end because they’re built around standard-size white uPVC doors. Trade2Base’s figures are aimed at installers pricing jobs, and they come out higher. If your quote lands somewhere between the two for a straight swap, it’s in the normal range.

Patio door prices by type and material

“Patio doors” usually means a sliding door set or a pair of French doors. Bifolds are often lumped in too, but they cost much more. We cover them separately in our bifold doors cost guide.

Supply-only prices

Door typeuPVC (supply only)Aluminium (supply only)
Sliding patio doors£500–£1,500£1,800–£4,500
French doors£500–£1,500£700–£2,500
Bifold doors (for comparison)£1,000–£4,000+£2,000–£6,000+

Source: DoorsDirect2U price guide (undated, live Nov 2026). MyJobQuote gives the same £500–£1,500 uPVC supply ranges for sliding and French doors. Mazuli (10 Nov 2026) prices a glazed Cortizo 4700 aluminium slider at £2,200–£4,000 supply only, depending on size.

Retail sets are cheaper still. Google’s shopping results on 18 November showed white uPVC French door sets from around £500 and uPVC sliders from about £730–£1,270 at UK retailers. These are standard sizes, and you’ll still need to pay for fitting.

Sliding patio doors cost

Sliding doors are the most common patio door. One panel slides behind a fixed one, so they don’t swing into the room or garden.

  • uPVC sliders: MyJobQuote puts a typical job at £850 supplied and installed (£600 supply only). BookaBuilderUK quotes about £1,000 fitted for a standard 1,800mm slider. Trade2Base says £1,300–£2,200 all in for a like-for-like 2-pane uPVC set.
  • Aluminium sliders: Trade2Base gives £2,500–£5,000+ for a 2-pane set fitted. MyJobQuote’s example of a large aluminium slider is £3,000. BookaBuilderUK quotes £3,500+ for a bespoke 2,400mm slim-frame system.
  • 3 or 4 panels, or lift-and-slide: expect £4,000–£8,000+ (Trade2Base).

French patio doors

MyJobQuote’s French door guide (October 2026) gives these standard-size fitted prices:

MaterialSupplyLabourTotal fitted
uPVC£700–£900£250–£350£950–£1,250
Aluminium£1,000–£1,100£300–£400£1,300–£1,500
Softwood timber£1,000–£1,400£250–£350£1,250–£1,750
Solid oak laminate£1,700–£1,900£400–£500£2,100–£2,400

French doors suit narrower openings, roughly 1.2–1.8m. Above that, a slider or bifold usually makes more sense.

uPVC vs aluminium vs timber

  • uPVC is the cheapest and needs little upkeep. Frames are thicker, so you see less glass.
  • Aluminium costs 30–60% more than uPVC for the same opening (BookaBuilderUK). In return you get slimmer frames, wider panels and a wider choice of colours.
  • Timber looks right on period houses and is often expected in conservation areas, but it needs repainting or re-staining every few years.
White French doors open from a bright living room onto a garden
French doors suit openings of roughly 1.2–1.8m. Photo: Unsplash / Elana Clark

Prices by size

Few guides price sliding doors by width, because most are made to measure. MyJobQuote does give fitted prices for a pair of French doors 2,100mm high:

WidthSupplyLabourTotal fitted
1,200mm£700–£1,300£300–£400£1,000–£1,700
1,500mm£750–£1,350£350–£450£1,100–£1,800
1,800mm£800–£1,400£400–£500£1,200–£1,900

Many off-the-shelf uPVC sliders come in widths of about 1.5m and 1.8m (for example 1,490mm and 1,790mm on retailer listings). A made-to-measure door adds around 10–25% (BookaBuilderUK). Aluminium sliders go much wider. Mazuli lists 2-panel Cortizo 4700 sets from 1,500mm up to about 5,000mm, and 3–6 panel sets up to 6,400mm.

Patio door installation cost: labour and extras

ItemTypical costSource
Fit only, customer supplies door (like-for-like)£350–£700Trade2Base (June 2026)
Labour, simple replacement£250–£700 (half to one day)BookaBuilderUK (June 2026)
Labour, moderate alterations£800–£1,500 (one to three days)BookaBuilderUK
Installer day rate£150–£200MyJobQuote (Sept 2026)
Window and brickwork removal, lintel, making good£800–£2,000MyJobQuote Q&A (2025)
Plastering and making good£300–£1,000BookaBuilderUK
Skip / waste removal£100–£300MyJobQuote £100–£200; BookaBuilderUK £150–£300
Upgraded locks, handles, trickle vents£50–£300BookaBuilderUK
Building control (if the installer isn’t registered)£200–£500BookaBuilderUK

BookaBuilderUK says labour in London and the South East runs 20–30% above the national average. Its example is a standard install at about £500 in the Midlands and £700+ in London. MyBuilder notes that spring and summer rates can be 10–20% higher, so booking in winter can save money. If you want to see how regional price differences work across a whole project, our how we calculate costs page explains the multipliers we use.

Replacing a window with patio doors, or widening an opening

This is where the cost changes most. A like-for-like swap is a one-day job. Cutting a window down to the floor or making an opening wider is building work.

Turning a window into patio doors

If the doors will be the same width as the window, the builder removes the brickwork below the cill, makes good the reveals and floor, and fits the doors. MyJobQuote puts a new opening at £1,900–£3,500, and converting a window into uPVC French doors at £2,350–£2,650. One installer in MyJobQuote’s guide itemised the builder’s side of the job as £180 to cut out the brickwork, £100 to plaster and make good, £80 to make good the floor and £200 to fit the door. That doesn’t include a lintel, the doors themselves or a skip.

Widening an opening

A wider opening needs a new lintel or steel beam, usually sized by a structural engineer, plus temporary support while the wall is cut. Trade2Base says this adds £1,000–£2,500+ to the job. BookaBuilderUK gives £1,500–£5,000 for widening, or more than £6,000 where the opening holds up floors above. For more on these costs, see our guides to steel beam costs, structural engineer fees and load-bearing wall removal.

Building control fees for this kind of work vary by council. For example, the Royal Borough of Windsor and Maidenhead’s 2026/27 charges list one beam or opening at £300 (full plans) or £345 (building notice). See building regulations costs for fees at other councils.

Sunlight coming through sliding glass patio doors into a living room
A like-for-like sliding door swap is usually a one-day job; widening the opening is building work. Photo: Unsplash / Jennifer Wang

Worked examples

These examples combine the published ranges above. They’re illustrations, not quotes.

1. Like-for-like uPVC slider, 1.8m wide

Old uPVC sliding doors replaced in the same opening by a FENSA- or CERTASS-registered installer. There’s no structural work and no separate building control fee.

  • Doors supplied and fitted: £850–£2,200 (MyJobQuote average to Trade2Base’s top figure)
  • Disposal of the old doors is usually included when a firm supplies and fits.

Total: about £850–£2,200. Time on site: around 4–6 hours (MyJobQuote).

2. Dining room window to uPVC French doors, same width

  • Conversion, supplied and fitted (brickwork out, doors in, plaster finish): £2,350–£2,650 (MyJobQuote)
  • Building control, building notice (RBWM example): £345

Total: about £2,700–£3,000. Check with your builder or building control whether the existing lintel is suitable. If a new one is needed, budget for the extras in example 3.

3. Opening widened to about 3m for an aluminium slider

ItemLowHigh
Aluminium sliding doors, glazed, supply only (Mazuli)£2,200£4,000
Fitting (Trade2Base fit-only rate)£350£700
Widening: lintel or beam, temporary support, making good (Trade2Base)£1,000£2,500
Structural engineer’s calculations£200£500
Building control (RBWM, one beam)£300£345
Flooring and external finishes, making good (MyJobQuote Q&A)£200£500
Total£4,250£8,545

That fits with BookaBuilderUK’s worked example, in which widening an opening for a 3-panel aluminium bifold came to £9,450. Bifold doors cost more than sliders, and that example included a £1,800 steel beam.

Do patio doors need planning permission?

Usually not. Planning Portal says you don’t normally need to apply for new windows and doors that look similar to those used in building the house. You will need to check first if:

  • the house is listed. Listed building consent is needed for significant works, and doing the work without it is a criminal offence.
  • you’re in a conservation area, national park or National Landscape, or your council has made an Article 4 Direction removing permitted development rights.
  • you’re a leaseholder. You may need your landlord’s or management company’s consent.
  • the doors are part of a new extension. The extension’s own planning rules apply. See our guide to rear extension costs.

Building regulations for patio doors

An external door is a “controlled fitting” under the Building Regulations, so even a straight replacement has to comply. In practice:

  • Use a registered installer. A firm registered with a competent person scheme such as FENSA or CERTASS can self-certify a replacement. You get a certificate when the job is finished, so keep it for when you sell.
  • Otherwise, building control approval is needed. This applies to DIY fitting and to installers who aren’t registered. A council or registered building control approver inspects the work and issues a completion certificate.
  • New or wider openings are structural work. They normally need a structural engineer to specify the lintel and building control sign-off (MyJobQuote, Trade2Base).
  • Energy efficiency: replacement doors that are more than 60% glazed must meet a limiting U-value of 1.4 W/m²K, with Door Set Energy Rating band C given as the benchmark (Approved Document L, Volume 1, Table 4.2). Your installer should be able to show you the rating.
  • Safety glass: glazing in doors up to 1,500mm from the floor counts as a “critical area” and must be safety glass, either toughened or laminated (Approved Document K).

Part Q security rules (PAS 24 doors) apply to new homes rather than replacements. Even so, a PAS 24-tested door set is worth asking for on any ground-floor patio door.

How to keep the cost down

  • Keep the same opening. It’s the biggest saving, because you avoid the lintel, engineer and building control fees.
  • Choose standard sizes if the opening allows. Made-to-measure adds 10–25%.
  • Book outside spring and summer. MyBuilder says installer rates can be 10–20% higher in peak season.
  • Combine jobs. If you’re planning a kitchen extension, having the doors fitted as part of the build is usually cheaper than adding them later.
  • Get itemised quotes. Check that removal, disposal, making good and certification are all included. Quotes for the same job can differ by 20–30% (MyBuilder).

Widening an opening or adding doors as part of a bigger job? Tell us about your project and we’ll put you in touch with a vetted local builder who can quote for the structural work and the doors together.

Get a free quote →

Patio doors cost: FAQs

How much does it cost to have patio doors fitted?

A like-for-like uPVC sliding or French door replacement costs about £850–£2,200 fitted in 2026. Aluminium sliders cost about £2,500–£5,000+. If you’re supplying the doors yourself, fitting alone is typically £350–£700.

How much does it cost to replace a window with patio doors?

Usually £1,900–£3,500, according to MyJobQuote. A uPVC French door conversion is typically £2,350–£2,650. A new lintel, widening or building control fees can push the total higher.

Do I need planning permission for patio doors?

Not usually, if the doors look similar to the house’s existing windows and doors. You’ll need to check with your council if the house is listed, in a conservation area or covered by an Article 4 Direction, or if you’re a leaseholder.

Do patio doors need building regulations approval?

Yes. Replacement doors are controlled fittings. A FENSA- or CERTASS-registered installer can self-certify the work. Otherwise you need building control approval, and new or widened openings always need it.

What are the standard sizes for patio doors in the UK?

Off-the-shelf uPVC sliders are commonly sold at about 1.5m and 1.8m wide, and French door sets typically come in widths of around 1.2–1.8m at about 2.1m high. Aluminium sliders are usually made to measure and can be over 6m wide.

How long does it take to fit patio doors?

A straightforward replacement takes about 4–8 hours (MyJobQuote). If the wall needs cutting or a beam fitting, allow an extra 2–3 days.

Are sliding doors easy to install?

For a professional fitter, a like-for-like swap is a one-day job. DIY fitting is possible, but you then need building control approval for the door to comply. Large aluminium panels are heavy and need at least two people.

Are aluminium patio doors worth the extra cost?

Aluminium costs about 30–60% more than uPVC for the same opening. You get slimmer frames and more glass, and it handles wide spans better. For a standard 1.5–1.8m opening, uPVC is usually the better-value choice.

Sources

Prices are guide figures from the sources above, gathered in November 2026, and VAT treatment varies between sources. They aren’t quotes. Your cost depends on the opening, the door specification and local labour rates. Extension Costs is an independent cost guide, not a builder or installer.

Similar Posts