Bifold Doors Cost in 2026: UK Prices, Fitting and Hidden Extras

The typical bifold doors cost in the UK in 2026 is £1,950 to £7,200 supplied and fitted, depending on how many panels you need and what they’re made of. That’s the door itself. If you’re cutting a new opening or widening a window, the steel, the engineer and the making good can add as much again. This guide gives 2026 prices by panel count and material, explains what labour costs, and shows three worked examples so you can see what a whole job really comes to.
Quick answer
- Supplied and fitted: about £1,950–£4,700 for a 3-panel set, £2,800–£5,700 for 4 panels and £3,550–£7,200 for 5 panels (MyJobQuote, September 2026).
- By material: uPVC is cheapest, aluminium costs most. A 4-panel set is roughly £2,800–£3,500 in uPVC and £4,300–£5,700 in aluminium, fitted.
- Labour on its own: around £600 (3 panels), £800 (4 panels) and £1,000 (5 panels).
- New or wider opening: add £800–£2,500+ for a steel beam, £200–£500 for a structural engineer and £400–£1,200 for making good (Trade2Base, June 2026), plus a building control fee.
Last checked: 16 November 2026. Prices include VAT unless stated. England rules for planning and building regulations.
How much do bifold doors cost in 2026?
The biggest driver of price is the number of panels, because that sets the width. Most homes have three, four or five panels. Each panel is usually 600–900mm wide, so a 3-panel set fits an opening of about 1.8–2.4m and a 5-panel set needs 3.6m or more.
MyJobQuote’s guide, updated on 22 September 2026, gives these typical supply-and-fit prices across all materials:
| Door set | Typical opening | Supply and fit | Fitting time |
|---|---|---|---|
| 3-panel | 1.8m–2.4m | £1,950–£4,700 | 1 day |
| 4-panel | 2.7m–3.5m | £2,800–£5,700 | 1–2 days |
| 5-panel | 3.6m–5m | £3,550–£7,200 | 2 days |
Source: MyJobQuote bifold door installation cost (updated 22 Sept 2026). The low end is uPVC, the high end aluminium.
Other 2026 sources land in a similar place. BDF Architectural, a bifold maker, says on its site (checked November 2026) that aluminium sets run from around £2,400 for two panels to about £9,600 for a large 7-panel set, with most homes paying £3,000–£6,000. Trade2Base, a trade pricing guide from June 2026, puts a 3-panel aluminium set at £2,500–£4,500 fitted and a 5-panel set at £4,000–£8,000.
Checkatrade’s figures are older (its table is marked September 2024) but show the same pattern: aluminium £3,000–£7,500 fitted, uPVC £2,000–£4,500 and timber £2,500–£5,500.
Why prices vary so much
- Width and height: taller doors and wider sets need heavier frames and bigger glass units.
- Frame material: aluminium costs most to buy but has the slimmest frames. uPVC is cheapest.
- Thermal performance: aluminium must be thermally broken to meet current building regulations. Trade2Base prices thermally broken aluminium at £3,500–£6,000 for 3 panels and up to £10,000+ for 5.
- Glass and extras: triple glazing, solar control glass, integrated blinds and flush thresholds all add to the price (see below).
- The opening: fitting into an existing opening of the right size is cheap. Creating one is not.
Bifold doors cost by material
MyJobQuote splits its prices into supply only and total cost. The difference between the two columns is roughly the fitting labour.
uPVC bifold doors
| Panels | Opening | Supply only | Supplied and fitted |
|---|---|---|---|
| 3 | 1.79m–2.4m | £1,350–£2,200 | £1,950–£2,800 |
| 4 | 3m–3.5m | £2,000–£2,700 | £2,800–£3,500 |
| 5 | 3.6m–4m | £2,550–£3,250 | £3,550–£4,250 |
uPVC is the budget choice. The frames are chunkier than aluminium, so you see less glass, and large uPVC sets can sag over time. It’s a sensible pick for a 3-panel set replacing old patio doors.
Aluminium bifold doors
| Panels | Opening | Supply only | Supplied and fitted |
|---|---|---|---|
| 3 | 2.1m–3.5m | £2,550–£4,050 | £3,150–£4,650 |
| 4 | 3.6m–4m | £3,500–£4,900 | £4,300–£5,700 |
| 5 | 4.2m–5m | £4,250–£6,200 | £5,250–£7,200 |
Aluminium is what most people picture when they think of bifolds: slim frames, powder-coated in grey or black, and strong enough for wide openings. It costs more but lasts longer and needs little upkeep.
Timber bifold doors
| Panels | Opening | Supply only | Supplied and fitted |
|---|---|---|---|
| 3 | 1.8m–2.4m | £1,400–£2,200 | £2,000–£2,800 |
| 4 | 2.7m–3m | £2,250–£2,650 | £3,050–£3,450 |
| 5 | 3.6m–4m | £2,700–£3,200 | £3,700–£4,200 |
Source for all three tables: MyJobQuote (22 Sept 2026). Trade2Base (June 2026) prices hardwood and oak much higher, at £3,500–£6,000 for 3 panels up to £7,000–£12,000+ for 5, so treat MyJobQuote’s timber figures as softwood or engineered timber.
Timber looks warm and suits period homes and oak-frame extensions. It needs repainting or re-oiling every few years, and good hardwood is pricey.
Bifold door installation cost
If the opening is already the right size and you’re replacing like for like, fitting is a one- or two-day job. MyJobQuote gives these typical labour costs:
| Door set | Typical labour cost | Time |
|---|---|---|
| 3-panel | £600 | 1 day |
| 4-panel | £800 | 1–2 days |
| 5-panel | £1,000 | 2 days |
Checkatrade’s older table puts labour at £600–£1,200 per job and notes that fitters usually work in pairs. If you need the old doors taken out and disposed of separately, MyJobQuote says removal costs about £160–£220 a day, or £70–£120 to get rid of the waste if you take them out yourself.
What fitting involves
On a straightforward job, the fitters take out the old doors and frame, check the opening is level and square, and fix the new outer frame to the brickwork. The track at the top carries the weight of the panels on most systems, so the head of the opening must be solid and straight. A sagging lintel is a common reason panels stick or drift out of line after a few months. The panels are then hung, adjusted and sealed, and the threshold is bedded on the sill or floor.
Before the fitters arrive, ask who measures the opening. If the supplier surveys and measures, they carry the risk if the doors don’t fit. If you measure for a supply-only order, the risk is yours, and a set made 20mm too wide can’t simply be trimmed.
Many suppliers fit their own doors, which is usually the safest route. If you buy supply-only online and hire a fitter, check who is responsible if the frame isn’t square or the panels don’t run smoothly.

The hidden cost: making or widening the opening
This is where budgets go wrong. Turning a window or a single back door into a 3–4m opening means taking out part of the rear wall. That wall holds up the floor and roof above, so it needs a steel beam or lintel, designed by an engineer and signed off by building control.
Trade2Base’s June 2026 guide prices the structural side like this:
| Item | Typical cost |
|---|---|
| Steel beam or lintel, opening up to 2.4m | £800–£1,200 |
| Steel beam or lintel, 2.4m–3.5m | £1,200–£2,000 |
| Steel beam or lintel, over 3.5m | £1,800–£2,500+ |
| Structural engineer (calculations for a typical opening) | £200–£500 |
| Making good: reveals, skim and first fix | £200–£500 |
| Making good: external render | £150–£400 |
| Making good: decoration | £150–£300 |
| Making good, total | £400–£1,200 |
Source: Trade2Base, bifold door costs UK (8 June 2026). These are trade prices for guidance, not quotes.
Building control fees for the beam are separate. In Windsor and Maidenhead, for example, the 2026/27 charge for “structural alterations of a single beam” is £300 for full plans or £345 for a building notice. Other structural work costing under £5,000 is £495 (full plans). Both include VAT. Your council’s fee will differ, so check its published charges. Our building regulations cost guide compares councils.
For more on the steel itself, see our steel beam cost guide, and our structural engineer cost guide for what the calculations involve.
Semi-detached and terraced homes
If the new beam will sit on a wall you share with a neighbour, or you need to cut into that wall, the Party Wall etc. Act 1996 applies. A party structure notice must be served at least two months before the work starts. Allow for that in your timetable, and for surveyor fees if your neighbour doesn’t consent. Our party wall agreement guide explains the process.
Extras that add to the price
Trade2Base lists these typical add-ons:
| Extra | Typical extra cost |
|---|---|
| Low-profile threshold | £0–£200 |
| Flush (level) threshold | £300–£600 |
| Triple glazing | £400–£800 |
| Solar control glass | £300–£600 |
| Self-cleaning glass | £200–£400 |
| Frosted or privacy glass | £200–£500 |
| Integrated blinds (4-panel set) | £400–£1,200 |
| Dual-colour frame (different inside and out) | £200–£400 |
| Matching sidelight | £500–£1,500 each |
| Access scaffold | £400–£900 a week |
| Annual service contract | £80–£150 a year |
A flush threshold gives you a level floor from kitchen to patio, which is the look most people want. It needs a drainage channel outside so rain doesn’t pool against the door. Solar control glass is worth considering on a south- or west-facing extension with a lot of glass, which can overheat in summer.
Do bifold doors need planning permission?
Usually not, if you’re replacing existing doors. The Planning Portal says installing patio doors at the rear of a house, where there’s currently a single external door, is likely to fall under permitted development, as long as the doors are of similar appearance to those used before.
You’re more likely to need permission, or another consent, if:
- you live in a listed building (you’ll need listed building consent for significant works);
- you live in a conservation area, national park or other designated area, where extra limits can apply;
- your permitted development rights have been removed, which is common on newer estates;
- you live in a flat or maisonette, which doesn’t have householder permitted development rights.
If permission is needed, the householder planning application fee in England is currently £548. It rises to £575 for applications made from 8 December 2026 (SI 2026/1192, made 10 November 2026). If you want proof that your doors don’t need permission, a lawful development certificate for proposed work costs £274.
Bifolds fitted as part of a new extension are covered by the extension’s own permitted development rules or planning permission.
Building regulations for bifold doors
Building regulations apply in two ways.
Replacing existing doors
Replacement doors must meet the energy rules in Approved Document L. Table 4.2 sets a limit of 1.4 W/m²K, or a Doorset Energy Rating of band C, for doors where more than 60% of the internal face is glazed, which covers almost every bifold. Use an installer registered with a competent person scheme such as FENSA or CERTASS, who can self-certify the work. Otherwise you’ll need to apply to building control yourself. Keep the certificate: your buyer’s solicitor will ask for it.
New or widened openings and extensions
Making a new opening or widening one is a structural alteration, so it needs building control approval for the beam, as shown above. In a new extension, there’s also a limit on glazing. CNC Building Control’s guidance says the total area of windows, rooflights and glazed doors in an extension shouldn’t normally exceed 25% of the extension’s floor area, plus the area of any windows or doors the extension covers up. Big bifolds plus a roof lantern can push you over that. If they do, your designer will need calculations to show the extension still performs, often by making the walls or roof better insulated to compensate.
Safety glass is required in doors and the glazed areas near the floor. Every reputable bifold set uses toughened or laminated glass as standard.
Worked examples
These examples use the published prices above. They’re our own estimates for illustration, not quotes. Your installer will price your actual job.
Worked example 1: swapping old patio doors for a 3-panel uPVC set
A semi-detached house has 1.8m sliding patio doors in a sound opening. The owner wants a 3-panel uPVC bifold in the same opening.
| Item | Low | High |
|---|---|---|
| 3-panel uPVC bifold, supplied and fitted (includes taking out the old doors) | £1,950 | £2,800 |
| Making good reveals, skim and first fix | £200 | £500 |
| Total | £2,150 | £3,300 |
No beam, no engineer and, if the installer is FENSA or CERTASS registered, no building control fee. This is the cheapest way to get bifolds.
Worked example 2: widening a rear window for a 4-panel aluminium set
A terraced house has a 1.5m kitchen window. The owner wants to cut it down to the floor and widen it to about 3m for a 4-panel aluminium bifold. This uses Trade2Base’s prices throughout, and Windsor and Maidenhead’s building control fee as an example.
| Item | Low | High |
|---|---|---|
| 4-panel aluminium bifold, supplied and fitted | £3,000 | £6,000 |
| Steel beam for a 2.4m–3.5m opening | £1,200 | £2,000 |
| Structural engineer | £200 | £500 |
| Making good inside and out | £400 | £1,200 |
| Building control, single beam, full plans (RBWM) | £300 | £300 |
| Total | £5,100 | £10,000 |
The structural work roughly doubles the cost of the door. If the beam sits on the party wall, add party wall costs and allow two months for the notice. Moving a radiator or drain under the old window would be extra.
Worked example 3: a 5-panel aluminium set in a new rear extension
A homeowner is building a single-storey rear extension with a 4.5m opening facing the garden. The extension builder forms the opening and fits the steel as part of the build, so only the doors and extras are priced here.
| Item | Low | High |
|---|---|---|
| 5-panel aluminium bifold, supplied and fitted | £5,250 | £7,200 |
| Flush threshold | £300 | £600 |
| Solar control glass (south-facing; optional) | £0 | £600 |
| Total | £5,550 | £8,400 |
Check the 25% glazing limit early. A 5-panel set in a 20m² extension is about 9m² of glass on its own, which is close to the limit before you add a rooflight. For the rest of the build, see our single storey extension cost guide, our kitchen extension cost guide or, for a narrow strip beside the house, our side return extension cost guide.
Planning an extension with bifold doors? Tell us about your project and we’ll pass your details to one vetted local builder who can price the opening, the steel and the doors together.
Bifold doors vs sliding doors: which costs less?
Sliding doors are usually cheaper for the same width, because they have fewer panels and less hardware. Trade2Base’s June 2026 patio door guide gives these supply-and-fit prices:
| Door type | Supply and fit |
|---|---|
| 2-pane uPVC sliding door, like for like | £1,300–£2,200 |
| 2-pane aluminium sliding door | £2,500–£5,000+ |
| Large 3- or 4-pane or lift-and-slide aluminium | £4,000–£8,000+ |
| 3-panel uPVC bifold (MyJobQuote, for comparison) | £1,950–£2,800 |
The choice is mainly about how you use the space:
- Bifolds fold away to open almost the whole width. Good if you want the kitchen and garden to feel like one space in summer.
- Sliding doors only open about half the width, but have bigger panes and slimmer frames, so you get more glass and a better view in winter. The panels don’t swing into the room or onto the patio.
In the UK, the doors spend most of the year shut. If you’ll mainly be looking out rather than walking out, sliding doors often give better value.
How to keep bifold door costs down
- Use the opening you have. Fitting into an existing opening avoids the beam, engineer and making good, which can cost as much as the door.
- Pick fewer, wider panels. Three wide panels usually cost less than four narrow ones.
- Choose standard sizes and colours. Made-to-measure and dual-colour frames cost more.
- Plan the doors with the extension. If you’re extending anyway, design the opening around a standard door width and get the builder to fit the steel during the build.
- Get an itemised price. Make sure the quote shows the doors, fitting, removal, threshold and any structural work separately, so you can compare like with like.
Bifold doors cost FAQs
How much do bifold doors cost in the UK?
In 2026, bifold doors typically cost £1,950–£4,700 for a 3-panel set, £2,800–£5,700 for 4 panels and £3,550–£7,200 for 5 panels, supplied and fitted. uPVC is at the bottom of each range and aluminium at the top.
How much does it cost to install bifold doors?
Labour alone is typically around £600 for a 3-panel set, £800 for 4 panels and £1,000 for 5 panels, if the opening is already the right size. Making a new opening adds a steel beam (£800–£2,500+), an engineer (£200–£500), making good (£400–£1,200) and a building control fee.
How much are aluminium bifold doors?
Aluminium bifolds typically cost £3,150–£4,650 for 3 panels, £4,300–£5,700 for 4 panels and £5,250–£7,200 for 5 panels, supplied and fitted. One maker quotes from around £2,400 for two panels up to about £9,600 for a large 7-panel set.
Are bifold doors cheaper than sliding doors?
Usually not. For the same width, sliding doors tend to cost less because they have fewer panels and less hardware. A like-for-like uPVC sliding door costs around £1,300–£2,200 fitted, against £1,950–£2,800 for a 3-panel uPVC bifold.
Do I need planning permission for bifold doors?
Usually not. The Planning Portal says installing patio doors at the rear of a house is likely to be permitted development if they look similar to the doors used before. Listed buildings, conservation areas, flats and homes where permitted development rights have been removed may need permission or consent.
Do bifold doors need building regulations approval?
Replacement doors must meet the energy rules, which a FENSA or CERTASS registered installer can self-certify. A new or widened opening is a structural alteration and needs building control approval for the beam. In an extension, total glazing should normally stay within 25% of the floor area plus any openings covered up.
How long does it take to fit bifold doors?
Fitting into an existing opening usually takes one day for a 3-panel set and up to two days for 4 or 5 panels. Widening an opening adds time for the steel and making good. Made-to-measure doors also have a manufacturing lead time, so order early.
Sources
- MyJobQuote: Bifold door installation cost (updated 22 Sept 2026)
- Trade2Base: Bifold door costs UK (8 June 2026) and Patio door installation costs UK (14 June 2026)
- BDF Architectural: bdfa.uk (aluminium bifold price guide, checked November 2026)
- Checkatrade: How much do bifold doors cost to install? (cost table marked September 2024)
- Planning Portal: Can I install patio doors to the rear of my house?
- HM Government: Approved Document L, conservation of fuel and power (Volume 1, Table 4.2)
- CNC Building Control: guidance on glazing limits for extensions
- Royal Borough of Windsor and Maidenhead: Building control charges, domestic alterations 2026–2027
This guide is general information for England, checked on 16 November 2026. It isn’t legal or professional advice. Prices are from the named guides and are not quotes; our worked examples are estimates. Fees and rules change, and your council or building control body has the final say on what your project needs.






