|

Structural Engineer Cost in the UK: What You’ll Pay in 2026

Metal props holding up the ceiling in a house stripped back for structural alterations

Quick answer: a structural engineer typically costs £300–£600 to calculate one steel beam, £300–£500 for an inspection with a short report, and £500–£2,500 for the structural design of an extension (£500–£1,500 for a loft conversion). Hourly rates are roughly £80–£150, and some guides go up to £200. Check whether VAT is included, because several published prices leave it out.

Last updated: 4 November 2026 · Figures compiled from published UK cost data and our own calculator (sources at the end) · How we calculate costs

Structural engineer cost is one of the smaller lines in a building budget, but it is hard to pin down. Search for a price and you’ll find Reddit threads, American figures and ranges so wide they don’t help. So we’ve put five UK price guides side by side, shown where they agree and explained why they differ. You’ll also see what the fee usually leaves out, and how to compare quotes properly.

Structural engineer cost by job

These are our working budget figures for 2026, based on the published guides compared in the next section. Most are before VAT, and London and the South East can be 15–25% higher.

JobTypical feeWhat you normally get
Chimney breast removal£100–£500Support design for what stays above
New window or door opening£150–£500Lintel or beam check
One steel beam (RSJ)£300–£600Beam size, bearings and padstones for building control
Several beams or a large knock-through£500–£900Calculations for each beam, plus connections
Inspection with a short report£300–£500Site visit and a written view on one concern
Detailed structural report£500–£1,500+Fuller assessment with recommendations
Garage conversion£300–£1,000Lintels, footings and floor checks (our budget figure)
Loft conversion£500–£1,500Floor, beam and roof calculations
Single-storey extension£500–£1,500Beam over the opening, foundations, drawings
Two-storey or complex extension£800–£2,500Fuller calculations and drawings
Subsidence or crack investigation£500–£1,500+Diagnosis, with monitoring advice if needed
Underpinning design£800–£3,000Foundation strengthening scheme

Sources: MyJobQuote, BestBuilders and Trade2Base for job ranges; our own cost method for the extension, loft and garage budget figures, which are the same ones used across this site.

What five UK price guides say

We didn’t find an official fee scale for this work, and we haven’t surveyed engineers ourselves. These are the prices each guide publishes, so you can see how far they agree.

JobHomeOwners Alliance (Jan 2026)MyJobQuote (Nov 2026)BestBuilders (Jul 2026, ex VAT)Trade2Base (Jun 2026, ex VAT)Checkatrade (May 2024)
Hourly rate£90–£200£75–£125£90–£150£80–£150£100–£200
Steel beam calcs£60–£950£300–£900£300–£600 (one); £500–£900 (several)£300–£600£200
Inspection£175–£300£200; £300–£500 with short report£350–£550 (half day with brief report)Not listed£300
Report or survey£500–£2,000£500–£1,500+£400–£900£400–£800£700 plus visit
Extension£750–£2,200*£400–£2,000£500–£1,500£600–£1,200 (single); £800–£1,800 (double)Not listed
Loft conversion£750–£2,200*£600–£1,800£500–£1,200£500–£1,000Not listed

*HomeOwners Alliance lists one figure for a loft conversion or extension consultation. Checkatrade’s table is the oldest here, so treat it with more caution. None of these is an official fee scale. BestBuilders, for one, says its ranges come from a regional cost model.

Why the prices differ so much

A low price and a high price can both be fair, because they often aren’t for the same thing. The main differences are:

  • Site visit: a price without a visit isn’t comparable with one that includes it, and not every job suits a desktop check.
  • Drawings: calculations alone aren’t the same as calculations plus drawings a builder can work from.
  • Complexity: one beam in a simple wall is quick. Multiple beams, older buildings and difficult ground can all add work.
  • Location: MyJobQuote lists £90–£150 an hour for London and the South East, against £60–£100 in rural areas.
  • Chartered status: BestBuilders suggests a premium of roughly 10–20% for a chartered engineer.
  • VAT: a VAT-registered engineer adds 20%, so £600 becomes £720. Someone with taxable turnover below the £90,000 threshold may not have to register, so ask.

Worked examples: the fee in context

These use published ranges and our own modelled figures. They aren’t quotes.

Example 1: removing a wall to open up a kitchen-diner

ItemLowHigh
Large opening of about 4m, including calculations and steel (MyJobQuote)£2,400£3,000
Building control (MyJobQuote’s domestic structural figure)£200£500
Total before plastering and decorating£2,600£3,500

The source doesn’t say whether its totals include VAT, or whether every part of the making good is covered, so ask for an itemised quote. If you’re planning something bigger, our kitchen extension cost guide has fuller budgets.

Example 2: a 20m² rear extension in Greater Manchester

Our single-storey extension cost guide models this job at about £59,500 all in, with £1,200 for the engineer. Add 20% VAT and that’s £1,440, or about 2.4% of the total. A fee at the top of our range, £2,500 plus VAT, would still be only about 5%.

Example 3: a rear dormer loft conversion in the Midlands

Our loft conversion cost guide models a 30m² dormer at £46,500–£70,500. An engineer at £500–£1,500 plus VAT comes to £600–£1,800, or about 1–3% of that total.

The point of these examples is that the engineer is rarely where a project’s money goes. Picking a cheaper quote that leaves out drawings or site visits can easily cost more later, once your builder has to work around the gaps.

Man holding up and checking building drawings inside a house
Photo: Unsplash

What the fee usually doesn’t cover

The engineer’s fee pays for design. Budget separately for the following unless your quote clearly includes them:

  • Steel and fitting: MyJobQuote puts RSJ supply at £300–£1,200. Prices have climbed sharply, with government figures showing fabricated structural steel up 19.9% in the 12 months to September 2026, against 7.2% for building materials overall.
  • Ground investigations: the Institution of Structural Engineers (IStructE) says you may need trial pits, boreholes or a tree survey, and that you would usually commission these yourself.
  • Extra visits and revisions: Trade2Base lists £400–£700 a day for visits outside the agreed scope, and MyJobQuote lists £90–£120 an hour for revisions.
  • Temporary works: propping is normally a contractor cost, according to IStructE, unless it’s priced separately. Check it’s in your builder’s quote.
  • Building control: this is a separate charge. Across our extension guides we budget £600–£1,200.
  • Party wall costs: a beam going into a shared wall can trigger the Party Wall Act. Our party wall agreement guide explains what to do.

Do you legally need a structural engineer?

Not by name. The government’s register of regulated professions protects the title Chartered Structural Engineer, but it doesn’t reserve the work itself to anyone. What the law does require is that structural work meets Part A of the Building Regulations, and building control typically asks for calculations to show it does.

In practice, that means you’ll want one for load-bearing wall removal, most extensions and nearly every loft conversion. An old loft floor usually wasn’t built to carry a room. Wigan Council’s building control guidance on load-bearing walls is blunt: “A structural engineer should be commissioned to design the structural alteration.”

In England, Part 2A of the Building Regulations also gives homeowners some duties as “domestic clients”, such as sharing information you hold about the building. If you don’t appoint a principal designer or principal contractor, those roles fall by default to the designer and contractor in control of each phase. So you aren’t expected to do this job yourself, but it’s sensible to know who holds each role. Wales and Scotland have their own building rules, so check with your local building control team there.

Engineer, architect or surveyor?

ProfessionalWhat they doUse them when
Structural engineerCalculates loads and designs beams and foundationsYou’re changing the structure, or you’re worried about cracks or movement
Architect or technologistDesigns the layout and prepares planning and building regulations drawingsYou need the project designed
Building surveyorInspects overall condition and advises on repairsYou’re buying a home or want a general condition check

Many projects need both a designer and an engineer. If you already know exactly what you’re building, such as a single beam, you may only need the engineer.

How to compare structural engineer quotes

Ask each engineer the same questions, then compare the answers side by side:

  1. Is the price fixed or hourly? A fixed fee is easier to budget for. If it’s hourly, ask for an estimate and a cap.
  2. Is there a site visit, and how many are included?
  3. Are drawings included, or only calculations? Your builder needs something they can work from.
  4. Will they answer building control’s queries? Site visits, revisions and liaison with building control may be charged separately.
  5. Is a final report included? HomeOwners Alliance specifically warns you to check this.
  6. Is VAT included?
  7. What’s the turnaround? Get it in writing.
  8. What are their membership and insurance details? Look for professional indemnity cover and membership of a recognised body. You can search IStructE’s FindanEngineer directory, or ask an engineer who says they are chartered which institution they belong to.

How long it takes

MyJobQuote suggests 3–10 working days after the visit for an inspection or wall removal, and 1–3 weeks for an extension or loft. BestBuilders suggests 3–7 working days for one beam and 2–4 weeks for a full design package. Allow for this in your programme, because a builder can’t order steel until the design is done. IStructE also notes that design dimensions shouldn’t be used to order materials. Your contractor should measure on site first.

Four ways to keep the fee down

  • Settle the design first. Changes after the calculations are done can mean paying for revisions.
  • Share what you already have. IStructE suggests giving your engineer old drawings, past reports and details of anything unusual, such as buried drains.
  • Keep the shape simple. HomeOwners Alliance notes that straight lines cost less to engineer than curves and awkward angles.
  • Get several quotes. Compare what’s included as well as the headline price.
Timber rafters and old insulation in an unconverted loft
Photo: Unsplash

Planning an extension or loft conversion? The engineer is only one part of the budget. Try our loft conversion cost calculator, see our garage conversion costs, or request a quote and we’ll share your details with one vetted local builder. Ask them whether an engineer is included in their price.

Structural engineer cost: FAQs

Do you need a structural engineer for an extension?

Almost always in practice, because a typical extension involves a steel beam over the opening into the house and new foundations, and building control will usually ask for calculations. No law says the person doing them must hold a particular title, but the work must meet Part A of the Building Regulations, and an engineer is the normal way to show that.

How much does it cost for a structural engineer to inspect a property?

Published UK guides put a basic visit at about £175–£300, and an inspection with a short written report at about £300–£500. A detailed report with recommendations usually costs £500–£1,500. Check whether the price includes the written report and VAT.

How long does a structural engineer report take?

Guides suggest 3–10 working days after the site visit for an inspection or wall removal, and about 1–4 weeks for a full extension or loft design package. Crack monitoring can take longer. Ask for the turnaround in writing when you get the quote.

Who pays for a structural engineer?

Usually the homeowner, as the person commissioning the work, and many hire the engineer directly so the calculations are independent of the builder. A design-and-build firm may include an engineer in its price. Where damage is being looked into, an inspection may be arranged through your home insurer or a new-build warranty, so check your policy before paying.

When should you call a structural engineer?

Call one before removing or altering a load-bearing wall, extending, converting a loft or changing foundations. Also call one if you notice problems such as moving walls, sagging ceilings or rooflines, or cracking that worries you. If you think the structure could be unsafe, get advice urgently and don't wait for a routine appointment.

How much does a structural engineer cost for a load-bearing wall?

Expect about £300–£600 for calculations on one beam and £500–£900 for several beams or a bigger knock-through, usually before VAT. That is only the design. The steel and the building work are separate, unless your builder quotes them together.

What percentage of the build cost does a structural engineer charge?

Most home projects are priced as a fixed fee or by the hour, not as a percentage. In our modelled 20m² rear extension, a £1,200 engineer's fee works out at about 2.7% of the building work. Treat that as a sense check only, because a simple job can cost a much smaller share.

Sources

Prices are typical published ranges and our own modelled figures, not quotes, and were checked on 4 November 2026. Extension Costs is an independent cost guide, not a builder or engineering firm, and this page isn’t structural, legal or financial advice. If you’re worried a building is unsafe, get professional advice straight away.

Similar Posts