|

Architect Fees in 2026: What Architects Charge for an Extension or Loft

Architectural floor plans and elevation drawings spread on a desk beside a laptop

Architect fees in the UK usually come to somewhere between 5% and 15% of the build cost for a full service, or a fixed £1,000–£6,000 if you only need drawings for planning and building regulations. Where you land depends on how much of the job you hand over, the size of the project, where you live and whether you hire a registered architect or an architectural designer. This guide compares six published price guides, shows what one practice says it charges, and works out the fees on five typical projects.

Quick answer

  • Full service (design to completion): most guides say 8–15% of the build cost. Small projects sit at the top of that range.
  • Planning drawings only: about £1,000–£3,000 for a simple extension (£1,450–£3,000 in BestBuilders’ August 2026 guide).
  • Planning plus building regulations drawings: about £2,500–£6,000 for a typical extension.
  • Hourly rates: £50–£145 an hour outside London; MyJobQuote says £150–£200 in London.
  • Typical single storey extension: our worked example puts full-service fees at about £4,100–£9,500 including VAT, or £2,100–£4,400 for design work only.

Last checked: 16 November 2026. Fees exclude the council’s planning and building control charges.

How architects charge

There’s no set price list. The Royal Institute of British Architects (RIBA) dropped its recommended fee scale in 2009, as the HomeOwners Alliance points out, so every practice sets its own fees. Most use one of three methods, and some mix them.

MethodHow it worksTypical figuresBest for
Percentage of build costThe fee is a share of what the builder charges. It rises if the build cost rises.8–15% for a full service on a home project (MyJobQuote, Urbanist Architecture); 10–15% for extensions (Planning Signal)Full service, where the architect runs the job from design to handover
Fixed feeAn agreed price for a defined package, usually split by stage.£1,000–£3,000 planning drawings; £2,500–£6,000 planning plus building regulationsMost extensions and loft conversions, where you only need drawings
Hourly rateYou pay for time spent.£50–£100 an hour in most guides; £60–£145 (BestBuilders); £150–£200 in London (MyJobQuote)Advice, feasibility studies, small changes, site visits

For homeowners, a fixed fee is usually the safest. You know the price before you start and can compare quotes line by line. A percentage fee makes sense when the architect is doing a lot more than drawing, such as tendering the job, checking the builder’s work and signing off payments.

What you get at each stage

Architects organise their work around the RIBA Plan of Work, which runs from Stage 0 (strategic definition) to Stage 7 (use). For a home extension, the stages that matter are:

  1. Brief and concept design. A survey of the existing house, a brief and a few design options.
  2. Planning drawings. Existing and proposed plans and elevations, a site plan and a location plan, ready for a planning application or a lawful development certificate.
  3. Technical design. Detailed drawings and a specification showing how the extension meets building regulations. Your builder prices from these.
  4. Tender. Sending the drawings to builders, comparing the prices and helping you choose.
  5. Construction. Site visits, answering the builder’s questions, checking work and valuing payments under a building contract.

The HomeOwners Alliance gives a typical payment split for a full service: about 35% for design and the planning application, 35% for technical design and tender, and 30% for construction to handover. It says this varies, but it’s a useful check when an architect quotes a total and asks for staged payments.

Architect fees compared: six UK price guides

We read six cost guides that publish architect fees. They broadly agree on hourly rates but differ a lot on drawings and percentages, partly because some are years old. Figures are as published; check each guide’s date.

Guide (date)% of build costPlanning drawingsPlanning + building regs drawingsHourly rate
MyJobQuote (3 Nov 2026)8–15% full service£3,000–£5,000 (extension)Full service £5,000–£12,000 (extension)£50–£100; London £150–£200
BestBuilders (22 Aug 2026)7–15%; small jobs 12–15%, large 6–10%£1,450–£3,000£3,000–£6,000 (single storey £3,000–£5,400)£60–£145
Planning Signal (12 Mar 2026)10–15% extensions; up to 20% small, complex jobs£1,000–£3,000£2,500–£6,000£50–£200 by seniority
HomeOwners Alliance (23 Jan 2026)3–15%£1,000–£2,500 single storey; £2,000–£3,500 two storey£3,000–£5,000 single storey; £5,000–£7,000 two storey£50–£100
Checkatrade (table Jan 2025)5–12%£1,000–£2,500 single storey; £2,000–£3,500 two storey£3,000–£5,000 single storey; £4,000–£6,000 two storey£50–£100
Airtasker (Jan 2023)5–12%£1,000–£3,000 single storey£3,000–£8,000 (extensions)£50–£100

BestBuilders says its figures include VAT but also that fees are “normally quoted plus VAT”, so treat its ranges with care. The other guides don’t always say. MyJobQuote’s “planning drawings” figure is notably higher than the others.

Three things stand out. First, the drawings-only price for a straightforward single storey extension clusters around £1,000–£3,000, and adding building regulations drawings roughly doubles it. Second, the percentage figures drift upwards in the newer guides: 5–12% in the 2023 and 2025 guides, 7–15% or 8–15% in the 2026 ones. Third, every guide that mentions size says small projects pay a higher percentage. An architect still has to survey, design, draw and apply for planning on a £30,000 extension, so the fee doesn’t shrink in line with the build.

Full-service fees for an extension

ProjectFull-service feeSource
Single storey extension£5,000–£7,500Checkatrade (Jan 2025)
Single storey extension£4,800–£9,600+ (incl VAT), or 10–15%BestBuilders (Aug 2026)
Double storey extension£6,000–£11,000Checkatrade (Jan 2025)
Double storey extension£7,200–£14,400+ (incl VAT)BestBuilders (Aug 2026)
House extension (any)£5,000–£12,000MyJobQuote (Nov 2026)
Loft conversion£3,000–£6,000+ (incl VAT)BestBuilders (Aug 2026)
Loft conversion£10,500–£11,000+MyJobQuote (Nov 2026)

What architects themselves publish

Few practices put prices on their websites. One that does is Urbanist Architecture, a London practice. Its January 2026 guide says a full service “from conception to completion” ranges between 8% and 15% of the build cost, and gives starting fixed fees, all plus VAT and based on London and South East prices:

Service (from)ExtensionSmall conversionSmall new build
Planning drawings£5,000£7,000£10,000
Building regulations / tender drawings£7,000£9,000£12,000
Whole project, typical£20,000–£40,000Loft £10,000–£30,0004-bed house £40,000–£60,000

Source: Urbanist Architecture, “How much do architects charge?”, last modified 19 January 2026. Its minimum fee is £3,000 + VAT.

Those figures are well above most of the price guides, and that’s the point worth taking away. A London practice offering design-led work charges very differently from a local architectural technologist drawing up a standard rear extension. Both are legitimate. They’re just different products.

Architect or architectural designer?

Only people on the Architects Register can call themselves an architect. The Architects Registration Board (ARB) says section 20 of the Architects Act 1997 makes it a criminal offence to use the title in business without being registered. The title is protected; the work isn’t. Architectural designers, architectural technologists and drawing services can legally draw your extension and submit the planning and building regulations applications.

The difference is price and scope. BestBuilders says designers and technologists are typically 20–40% cheaper than architects, at £48–£96 an hour against £60–£145 for an architect. Checkatrade’s (older) table puts an architectural technologist at about £1,750 + VAT for single storey planning drawings and £4,000 + VAT for building regulations drawings.

  • Choose an architect for a design-led project, a listed building or conservation area, a tricky site, or when you want someone to run the build and check the builder’s work.
  • Choose a designer or technologist for a standard rear extension, a dormer loft conversion or a garage conversion, where you mainly need clear, compliant drawings.

Either way, check the register (or membership of a body such as the Chartered Institute of Architectural Technologists), ask to see similar projects, and make sure they hold professional indemnity insurance.

Two people reviewing architectural blueprints on a desk with a calculator
Going through the drawings line by line is where the design fee earns its keep. Photo: Unsplash / Pedro Miranda

Architect fees for an extension: five worked examples

To show what the percentages mean in pounds, we’ve worked out fees on five typical projects. The build costs come from our calculator method: floor area × our standard-finish rate per m² × the regional multiplier, before VAT. These are our estimates, not quotes.

We show two fee levels. “Design only” uses the 4–7% design allowance our calculator adds for drawings and applications (3–6% for garage conversions). “Full service” uses the 8–15% range from MyJobQuote and Urbanist. Our calculator’s allowance is meant for design work. If you want an architect to run the whole job, budget for the full-service figure instead. VAT at 20% is added, because most practices are VAT registered.

Example 1: single storey rear extension, 20m², Midlands

ItemLowHigh
Build cost (20m² × £2,200–£2,700 × 0.98, ex VAT)£43,120£52,920
Design only (4–7%)£1,725£3,704
Design only, incl VAT£2,070£4,445
Full service (8–15%)£3,450£7,938
Full service, incl VAT£4,140£9,526

The design-only figure sits comfortably inside the £3,000–£5,400 that BestBuilders quotes for single storey “full plans”. The full-service range matches the £4,800–£9,600+ it gives for a full service. For the build itself, see our single storey extension cost guide.

Example 2: two storey extension, 40m² over two floors, South East

ItemLowHigh
Build cost (40m² × £1,950–£2,400 × 1.12, ex VAT)£87,360£107,520
Design only (4–7%)£3,494£7,526
Design only, incl VAT£4,193£9,032
Full service (8–15%)£6,989£16,128
Full service, incl VAT£8,387£19,354

This is where a percentage fee gets expensive. On a project this size, a fixed fee for drawings plus a few paid site visits is often far cheaper than a full service. Bigger projects also tend to attract lower percentages: BestBuilders puts large jobs at 6–10%. More on the build in our two storey extension cost guide.

Example 3: side return extension, 12m², London

ItemLowHigh
Build cost (12m² × £2,500–£3,100 × 1.25, ex VAT)£37,500£46,500
Design only (4–7%)£1,500£3,255
Design only, incl VAT£1,800£3,906
Full service (8–15%)£3,000£6,975
Full service, incl VAT£3,600£8,370

Small but fiddly. Side returns often involve party walls, steel beams and tight access, and the guides all say small jobs pay the higher percentage. In London, expect the top of these ranges or above: Urbanist’s planning drawings alone start at £5,000 + VAT. See our side return extension cost guide.

Example 4: dormer loft conversion, 30m², North of England

ItemLowHigh
Build cost (30m² × £1,220–£1,740 × 0.92, ex VAT)£33,672£48,024
Design only (4–7%)£1,347£3,362
Design only, incl VAT£1,616£4,034
Full service (8–15%)£2,694£7,204
Full service, incl VAT£3,233£8,644

Many dormers are built under permitted development, so you may only need drawings for a lawful development certificate and building regulations. The HomeOwners Alliance puts loft drawings at £900–£1,500 for planning only and £1,400–£2,000 with building regulations, and BestBuilders at £1,450–£3,600. Many specialist loft companies also include drawings in their price. See our dormer loft conversion cost guide.

Example 5: single garage conversion, 16m², South West

ItemLowHigh
Build cost (16m² × £660–£920 × 1.04, ex VAT)£10,982£15,309
Design only (3–6%)£329£919
Design only, incl VAT£395£1,102
Full service (8–15%)£879£2,296
Full service, incl VAT£1,054£2,756

This one shows where percentages stop working. Few architects will take on a full service for under £3,000 (Urbanist’s minimum is £3,000 + VAT), so on a small job you’ll pay a fixed fee instead. For a garage conversion, a designer or technologist drawing a building regulations package is the usual route.

What the examples tell you

  • For most extensions and lofts, a design-only package costs roughly £1,500–£4,500 including VAT.
  • A full service roughly doubles that, and on a large project it can pass £15,000.
  • On small jobs, minimum fees matter more than percentages.
  • London prices sit well above everything else, for the build and for the fees.

Planning an extension or loft conversion? Tell us about your project and we’ll pass your details to one vetted local builder, who can tell you whether you need full drawings or can work from a designer’s plans.

Get a free extension quote →

What’s not included in architect fees

An architect’s quote covers their time and drawings. These are usually extra, and they add up:

CostTypical amountSource
Householder planning application (England)£548 (no VAT)Planning Portal fee schedule; rising to £575 on 8 December 2026 (SI 2026/1192)
Lawful development certificate (proposed use)£274Planning fee schedule
Measured building survey£360–£720BestBuilders
Structural engineer, single beam calculation£300–£600BestBuilders
Structural engineer, full design£480–£1,200+BestBuilders
Building control£600–£1,200 (our calculator allowance)Extension Costs method
Party wall surveyor£1,000–£3,000 per neighbourExtension Costs method

Some guides are out of date on council fees. The HomeOwners Alliance page, updated in January 2026, still says a householder application is £258; it has been £548 since April 2025. For more detail see our guides to planning permission costs, building regulations costs and structural engineer costs.

What pushes architect fees up

  • Location. London and the South East cost more. BestBuilders puts full plans there at 20–40% above average, and Planning Signal says the same 20–40% for London. Checkatrade’s older guide says about 10%.
  • Listed buildings and conservation areas. MyJobQuote says to expect 10–20% more, because of extra drawings, heritage statements and negotiation with the council.
  • Project size. Smaller projects pay a higher percentage. Larger ones pay more in pounds.
  • Design changes. Most fixed fees allow one or two rounds of changes. After that, work is charged by the hour.
  • Planning refusals. Revising and resubmitting drawings after a refusal is usually extra.
  • Seniority. Planning Signal gives £50–£80 an hour for a newly qualified architect and £120–£200 for a director.

Is an architect worth the fee?

Often, yes, but not always for the same reasons. A good design can make a modest extension feel far bigger than its floor area, by getting the light, the layout and the link to the garden right. A good architect can also save money. Clear technical drawings mean builders price the same job, so their quotes are easier to compare. Fewer gaps in the drawings mean fewer extras once the build starts, and extras are where budgets usually go wrong.

The case is weaker for a simple, standard project. A plain single storey rear extension or a box dormer is something most experienced builders have done many times. Here, the value is mainly in getting planning and building regulations approval first time, which a competent designer or technologist can do for less. Spend the difference on the build, or keep it as contingency.

Questions to ask before you hire

  • Are you on the Architects Register, or a member of a professional body?
  • Do you hold professional indemnity insurance, and for how much?
  • What exactly does the fee cover: survey, how many design revisions, planning, building regulations, structural coordination?
  • Is the fee fixed or a percentage, and does it include VAT?
  • What happens to the fee if planning is refused or I change the design?
  • Can I see similar projects you’ve done nearby, and speak to those clients?
  • Will you visit site during the build, and what does each visit cost?

Get the answers in a written appointment letter or contract before work starts. It protects you both.

How to keep architect fees down

  1. Write a clear brief. Know what rooms you want, your budget and your must-haves before the first meeting. Fewer redesigns means a lower bill.
  2. Only buy what you need. If your builder is experienced and the extension is simple, you may only need planning and building regulations drawings, not a full service.
  3. Ask for a fixed fee, split by stage. You can stop after planning if the project changes.
  4. Get two or three quotes for the design work. Compare exactly what each includes: survey, number of revisions, structural coordination, site visits.
  5. Check whether VAT is included. On a £5,000 fee, VAT adds £1,000.
  6. Use a design-and-build firm if it suits. Some builders and loft companies include drawings in their price. Make sure you can see the drawings before you commit.

Architect fees FAQs

How much does an architect cost for an extension?

For drawings only, about £1,000–£3,000 for planning and £2,500–£6,000 including building regulations, depending on the guide. A full service, where the architect also tenders the job and oversees the build, is usually 8–15% of the build cost. On a 20m² single storey extension in the Midlands, we estimate that at about £4,100–£9,500 including VAT.

What percentage do architects charge?

Most 2026 guides put a full service at 7–15% or 8–15% of the build cost. Smaller projects tend to pay 12–15%, and larger ones 6–10%. Older guides quote 5–12%.

How much are architectural drawings for an extension?

Planning drawings for a simple extension usually cost £1,000–£3,000. Adding building regulations (technical) drawings takes the total to about £2,500–£6,000. London practices can charge much more: one publishes planning drawings from £5,000 + VAT.

What is an architect’s hourly rate in the UK?

Most guides say £50–£100 an hour. BestBuilders gives £60–£145, and MyJobQuote says £150–£200 an hour in London. Planning Signal says a director can charge £120–£200.

Do I need an architect for an extension?

No. There’s no legal requirement to use an architect. The title “architect” is protected, but anyone can draw plans and submit planning and building regulations applications. Many homeowners use an architectural designer or technologist, which BestBuilders says is typically 20–40% cheaper.

Do architect fees include VAT?

Not always. Many practices quote fees plus VAT, so a £3,000 fee becomes £3,600. Check every quote. The council’s planning fee has no VAT.

Do architect fees include planning fees?

No. The architect’s fee covers their work. The council’s fee is extra: £548 for a householder application in England, or £274 for a lawful development certificate. It rises to £575 for applications made from 8 December 2026 (SI 2026/1192).

How much does an architect cost for a loft conversion?

Drawings for a loft conversion usually cost £900–£3,600, depending on the guide and whether building regulations drawings are included. A full service is about £3,000–£6,000+ in BestBuilders’ guide, though MyJobQuote quotes £10,500 or more. Many loft companies include drawings in their price.

Sources

This guide is general information, checked on 16 November 2026. It isn’t professional advice. Fees vary by practice, project and region, and the worked examples are our own estimates, not quotes. Planning fees are for England; Wales, Scotland and Northern Ireland set their own.

Similar Posts